Polypropylene Fibres

BF - 06 mm Fibre

BF - 12 mm Fibre

BF - 19 mm Fibre

It is a micro reinforcement system used for concrete, plaster, screed, plaster, bitumen, precast and shotcrete applications. Field and laboratory studies conducted today show that CONCRETE FIBERS are constructed using Polypropylene Fibers provide high performance under all conditions.

 

Architects, engineers and academics working on various projects around the world agree that there is no concern about the use of polypropylene fibers, but they do benefit from it.

BF-06mm Application Areas

• Repair and Adhesion Mortars
• Bituminous Mixtures
• Concrete and Plaster Plaster

BF-06mm Features & Benefits

• Prevents crack formation in plaster and repair mortars

BF-06mm Participation Rates

BETONFIBER®06 – 6 mm long and 25 g packages. Repair mortars are used in the amount required for filling mats or plaster. BETONFIBER®06 Polypropylene Fibers can be incorporated as they are in the mortar. It should be mixed enough to provide the mixture.

BF-06mm Technical Specifications

Standard: ASTM CIII6 CE, EN 14889-2
BBA 92/2830
Appearance: Natural White Fiber
Type: Polypropylene
Purity: 100% Purity
Density: 0.91 g / cm³
Length: 6 mm
Cross section & Diameter: Circular, 18μm -20μm

BF-12mm Application Areas

• Field Concretes and Screed Applications
• Structural Reinforced Concrete Systems
• Repair and Adhesion Mortars
• Prefabricated Elements
• Bituminous Mixtures
• Sprayed Concrete

BF-12mm Features and Benefits

• Reduces shrinkage and shrinkage of plastic concrete.
• Equips concrete in three dimensions.
• Reduce segregation.
• Makes concrete ductile and gives toughness.
• Reduce the permeability of concrete.
• Increase the impact strength of concrete.
• Increase pressure and bending strength of concrete.
• Not affected by acids and bases, not graded.
• Delays the corrosion and rusting of the equipment.
• Prevents the concrete from disintegrating and crumbling, less damage to the earthquake and less risk of collapse.
• It increases the resistance against abrasive chemicals.
• Prevents surface abrasion, dusting, crumbling and flaking.

BF-12mm Participation Rates

BETONFIBER®12 – 12 mm long and 600 g water-soluble packages.
Based on general standards, at least 0.6 Kg of fiber should be used for 1m3 concrete.
BETONFIBER®12 Polypropylene Fibers can be added as well as in the mortar thanks to water-soluble special bags. One packet per cubic meter is added to the concrete plant, mixer or concrete mixer. After mixing for 5 minutes at high speed, BETONFIBER® 12 Fiber bundles are untied and millions of fibers are homogeneously distributed over the entire amount of concrete waste. Mixing too much does not hurt the performance of the product. High wear resistance and where micro reinforcement density is required, the BETONFIBER®12 fiber dosage can be taken up to three times the concrete volume (up to 1.8 kg / m3).

BF-12mm Technical Specifications

Standard: ASTM CIII6 CE, EN 14889-2
BBA 92/2830
Appearance: Natural White Fiber
Type: Polypropylene
Purity: 100% Purity
Density: 0.91 g / cm³
Length: 12 mm
Cross section & Diameter: Circular, 18μm -20μm

BF-12mm Application Areas

• Field Concretes and Screed Applications
• Structural Reinforced Concrete Systems
• Repair and Adhesion Mortars
• Prefabricated Elements
• Bituminous Mixtures
• Sprayed Concrete

BF-12mm Features and Benefits

• Reduces shrinkage and shrinkage of plastic concrete.
• Equips concrete in three dimensions.
• Reduce segregation.
• Makes concrete ductile and gives toughness.
• Reduce the permeability of concrete.
• Increase the impact strength of concrete.
• Increase pressure and bending strength of concrete.
• Not affected by acids and bases, not graded.
• Delays the corrosion and rusting of the equipment.
• Prevents the concrete from disintegrating and crumbling, less damage to the earthquake and less risk of collapse.
• It increases the resistance against abrasive chemicals.
• Prevents surface abrasion, dusting, crumbling and flaking.

BF-12mm Participation Rates

BETONFIBER® 19 is in the form of paper packs with a length of -19 mm and a capacity of 900 g of water.
Based on general standards, at least 0.9 Kg of fiber should be used for 1m3 concrete.
BETONFIBER® 19 Polypropylene Fibers can be incorporated as well as in the mortar thanks to water-soluble special bags. One packet per cubic meter is added to the concrete plant, mixer or concrete mixer. After mixing for 5 minutes at high speed, BETONFIBER®19 Fiber bundles are thawed and millions of fibers are homogeneously distributed over the entire amount of concrete waste. Mixing too much does not hurt the performance of the product. Where high abrasion resistance and micro reinforcement density is required, the BETONFIBER®19 fiber dosage can be doubled (up to 1.8 kg / m3) relative to the concrete volume.

BF-12mm Technical Specifications

Standard: ASTM CIII6 CE, EN 14889-2
BBA 92/2830
Appearance: Natural White Fiber
Type: Polypropylene
Purity: 100% Purity
Density: 0.91 g / cm³
Length: 19 mm
Cross section & Diameter: Circular, 18μm -20μm

Beton Sıva

Concrete and Plaster

Şap Betonları

Screed Concrete

End. Sap Betonları

Industrial Screed Concrete and Field Concretes